Looking for an easy way to clean your parts and keep your shop clean too!
Then you'll love a MiJET Air Powered Parts Cleaner!
If you've ever had to clean off parts, you know how messy it can be. Especially if you're
using an aerosol can or an air sprayer. Your parts may get clean, but now the debris, dust, and solvent you
just blew off is all over your shop and even in the air your breathing! Well, we have a better way and it's
called MiJET!
MiJET Helps Solve Four Major Problems Over Typical Cleaning Methods
1 - Unhealthy oil-ladened air is captured 2 - Accidents are reduced from slipping and falling on oily floors 3 - Cleaning time and supplies are reduced 4 - Expensive coolants are captured for recycling
All of these problems are solved with no electricity required, just an existing shop air line! The units are portable,
have a small footprint, and can easily be installed next to each CNC machine while still making valuable shop floor space
available for other operations.
See a MiJET in action!
What A MiJET Parts Cleaner Can Do
The MiJET is a high tech parts cleaner that lets you quickly clean your parts off while a high powered
vacuum sucks away the debris, dust, and solvent into a recycling container while at the same time filtering
the air being sucked through the unit to keep solvents and aerosols out of the air in your shop.
It's literally a high powered air jet sprayer, a high volume vacuum cleaner, an air filtration unit,
and a recycling unit all built into an easy to use, compact, portable machine!
To make it even cooler, the MiJET doesn't even use electricity! Instead, you simply attach
it to your shop airline coming from an air compressor and you're ready to go!
With it's easy to use cleaning wand, compact design, and optional roll around dolly, you can position your MiJET Parts Cleaner
anywhere you need to clean parts in your shop making it the ultimate parts cleaner!
It's really simple to use too! Just hold your part over the opening of the MiJET Parts Cleaner and spray it off and the MiJET does the rest!
After you've captured enough debris, you can easily empty the recycling container on the bottom too!
How The MiJET Parts Cleaner Works
The MiJET Parts Cleaner works by creating both negative and positive air pressure
to clean your parts, capture the debris & solvent, and clean the air all at the same time.
The MiJET does this by utilizing a single incoming air line connected to the side of the MiJET unit.
As the trigger on the MiJET Parts Cleaning Wand is pulled open, it lets compressed air flow through
an air powered vacuum fan mounted inside the MiJET Parts Cleaner.
As the fan spins, it generates up to 500 CFM of negative air pressure or suction to helps keep all the
debris contained inside the machine as the parts are cleaned.
Next, the compressed air travels out the other side of the fan and back out of the unit and up to the MiJET Parts Cleaning Wand where it's
expelled as a high velocity jet of air that can be used to clean the parts off inside center of the MiJET Parts Cleaner.
As the cleaning air gets moved through the center of the unit, it gets sucked downwards and then out the side of the
MiJET Parts Cleaner through a heavy duty high volume, high efficiency air filter. This filter captures any airborne particles, solvents, or cleaners
which helps keep the air inside your shop nice and clean.
To turn the air flow off, you simply release the trigger on the MiJET Parts Cleaning Wand. This stops the air flow to the vacuum fan which
then turns the suction fan off.
Emptying The MiJET Parts Cleaner
To clean the unit out, you simply unlatch the clamp on the recycling container and lift the top portion of the MiJET Parts Cleaner off.
Then simply dump out the recycling container and reattach it to the bottom of the MiJET Parts Cleaner!. It's just that simple!
Benefits Of Using A MiJET Parts Cleaner
Using a MiJET Parts Cleaner in you shop comes with great benefits! Whether it's helping to keep
your shop floor cleaner or saving you time and money on production runs, or even helping
you become greener by recycling materials; a MiJET Parts Cleaner is sure to help improve
your operation in several ways! Check out some of the great benefits below!
One Touch Operation
Only requires one hand to operate the machine
Easy on/easy off with air supply trigger (or air pedal with blind hole unit)
Makes the machine easy to use and allows for quicker cleaning
Requires No Electricity, Powered By Compressed Air
Uses a single air line from an air compressor
Can be used anywhere an air supply is available
Quickly connects & disconnects from air supply
No risk of electrical shock
Safe to use in damp environments
Self-Contained, Compact, Portable Design
Small footprint takes up very little shop space
Can be located right next to production equipment
Optional dolly allows for quick repositioning to where parts cleaning is needed
Recycles Lubricants & Scraps
Captures all debris from parts as they are cleaned
Expensive coolants and solvents can be reused
Scraps, chips, and debris can be recovered and recycled
Several Configurations And Options
Many different configurations and models available
Can be mounted on a cart or under a table
Several different sized filtering baskets and accessories available
Easily removable and replaceable parts means easy to maintain and use
Can be easily modified to meet your parts cleaning requirements
Creates A Cleaner/Safer Shop Environment On Production Floor
Captures a wide variety of solids and liquids from parts including:
Large fluid drops - Oil based lubricants, aqueous lubricants, coolants, solvents, etc
Particulates - Metal chips, plastic chips, sawdust, sand, etc
Dust - Accumulated dirt and debris
Exhaust air is filtered resulting in better air quality in your shop
Shop floor kept cleaner as atomized particles, aerosol mists, and particulates are captured during cleaning
Reduced chance of inhaling aerosol mists and debris by employees as the MiJET captures much of these
Help to meet OSHA and NIOSH limits on airborne mist levels
Saves Time & Money
Allows for cleaning and inspection of parts right at production site instead of moving them to a separate location
Reduces time to clean parts resulting in faster product/project turn around times
Lowers production costs as projects are completed faster resulting in higher profits
Expensive coolants, lubricants, solvents, and scrap material can be recycled reducing operating costs
Cleaner shop floor and improved air quality results in reduced lost work days and healthcare costs
Easily can be moved from station to station freeing up time and reducing equipment requirements
Compact design takes up less shop space giving more room for additional production equipment
Few moving parts results in lower operating & maintenance costs
No expensive wiring to install, just run an air line!
Integrates Well Into Practically Any Industry With A Parts Cleaning Need
Automotive Manufacturing
Automotive Repair Garages
Aerospace Manufacturing
CNC Cutting Shops
Commercial Food Preparation
Dental Manufacturing
Furniture Manufacturing
Injection Molding
Laboratories
Pharmaceutical
Colleges, Universities, & High Schools
And many, many more!
Learn more about the MiJET Parts Cleaner - The ULTIMATE Parts Cleaning Machine!
Customer Testimonials
While we think a MiJET Parts Cleaner would be an awesome addition to your production area, don't
take our word for it! Check out what actual MiJET customers think of these great machines!
"I think the MiJET is a great and innovative product! Ever since our shop purchased MiJET units,
my grinding area has never been cleaner. Also, not blowing the debris from wet grinders all over the shop,
has decreased my asthma symptoms. Thanks!" - Tim Miller - Tool maker for over 20 years, MachineCraft Inc.
"We bought a MiJET and the machinists love it. It reasonably priced, does what they claim it’ll do and
best of all [the manufacturer] is a PMPA member. Make sure you buy the basket inserts, and I’d recommend the wheeled dolly.
At the time we bought the MiJET I bought another system that does not work nearly as well and it cost me twice as much.
I hesitate to share that name over the span of the nation as I do not want to disparage anyone but I thought if
I could save you testing / experimenting time I would mention that we did so and MiJET was the clear victor in the contest." - Dan Vermeesch, Plant Manager Micron Mfg. Co
"The areas are much cleaner where the MiJET units are being used as compared to other areas." - Plant Operator
"Since we installed MiJET units near several machines, many employees have thanked me for purchasing them.
Our facility is cleaner, safer, there is less oil on our floors and mist in the air." - Michael Kreamer, GM, Leipold
"I would like to see one at every machine on our floor."- Engineer
"I am impressed with the amount of oil captured in the MiJET. Now all of that oil is no longer settling on the floor."- Machine Operator
MiJET Parts Cleaner Technical Specifications
Air Requirements: 35 CFM @ 90 psi
Suction Fan: 500 CFM
Recycling Container Capacity: 2 Gallons
Height: 34" to 43" (depending on configuration)
Diameter: 14" & 22"
Inlet pipe opening: 8" & 12" diameter
Sound Level: <86 dB (A)
Cleaning Wand: Prevost OHSA Compliant air nozzle
Wand Hose: 13 ft spiral hose with swivel end fitting
The MiJET Parts Cleaner is available in several different configurations to meet your unique cleaning needs.
We also offer several different accessories as well to help you outfit your MiJET Parts Cleaner just the way you need it.
Click on any of the MiJET pictures below for a larger view.
8" MiJET Workstation With 2 Gal Red Dip Tank & Parts Basket
This is a great combination package! We include our 8" Angled MiJET Cleaner, a heavy duty
2 gallon red steel solvent dip tank, and a heavy duty butcher block table with cabinet mounted on casters. The cabinet
is enclosed on 3 sides and makes for a great, clean look for your shop!
Specifications:
Workstation Dimensions (without MiJET or Solvent Dip Tank) - 35" Tall x 24.25" Wide x 24.25" Deep
Includes:
- 8" MiJET Angled Top Parts Cleaner (14-8FL-545)
- Air Nozzle (13-028)
- Spiral Air Hose with swivel end fitting (13-029)
- Red 2 Gal Solvent Dip Tank (15-100)
- Stainless Parts Basket for 8" MiJET Angled Top (15-109)
12" MiJET Wash Station Stainless
With Stainless Washing Dip Tank & Parts Basket
Just like the 8" stainless wash station above but with a larger stainless tank and our 12" angled MiJet Unit.
The lid with integrated spout is held open with a pneumatic spring which can completely close to
minimize evaporation.
Workstation Dimensions (without MiJET or Solvent Dip Tank)
- 35" Tall x 36" Wide x 24.25" Deep 12" Model Includes:
- 12" MiJET Angled Top Parts Cleaner (15-12SX-20ANG-HF)
- Air Nozzle (13-028)
- Spiral Air Hose with swivel end fitting (13-029)
- Stainless Parts Basket for 12" MiJET Angled Top (15-107)
- Stainless Steel 5.5 gal Solvent Dip Tank with integrated spout