| Electric Motor Gear Pumps | Gas Engine Gear Pump |
The Ultimate Oil Collection Pump For Transferring WMO or WVO!
Check out this incredible gas powered waste oil gear pump!
Heavy Duty All The Way Through!
It transfers waste vegetable oil or waste motor oil like a pro!
When the pumps are put together, they decided to build it as tough as they could. They start out with
a proven 79 CC gas powered motor that is capable of generating 2.5 horse power.
Then a heavy duty 1" milled aluminum mount is bolted right to the side of the engine with four heavy duty bolts
ensuring a nice, snug fit!
So, How Well Does It Perform? INCREDIBLY WELL!!!
After the mount is attached, a heavy duty 25 gallon per minute rated oil transfer gear pump is mounted to the engine
mount and a handle and pump head support are then attached. The waste oil sucking beast of a pump head
features heavy duty interlocking steel gears that can transfer oil extremely effectively! The pump head has
3/4" NPT threaded ports on either side and ships with stainless hose barbs that fit 1" inner diameter hose.
If you thought powering a gear pump with an electric motor was sweet,
wait until you see the massive power that a full 2.5 Horse Power
gasoline motor can give it! You'll be absolutely blown away at how well it works! It takes an already
incredible pump head and makes it even better! French fries? No problem!! Dirt & grime? Watch it fly!
Watch It In Action!
When using this incredibly powerful setup, you and others watching it run may develop spontaneous grins, give high fives
all around, or break out into hysterical fits of laughter when you see how well it works!
Oh yeah....and hold on to the other side of the hose, it'll kick out a serious stream of oil!
In the testing we did with it, our test group couldn't get over how well it worked and kept looking for
opportunities to try it out. They reported back things like, "Did you know you can suck up chicken bones
with this thing?" (not that we recommend doing that...but yes, it
sucked them up, crushed them, and spit them out the other side like a meat grinder) or
"You oughta see what this thing does to french fries! It eats everything in sight!".
It not only sucked up all the oil, but all of the grunge in the bottom of the barrels that
they were collecting from too--something typically difficult for other pumps to handle. They absolutely loved it!
Also, we're not exactly sure how much faster adding the gas motor makes the flow rate,
but lets just say it definitely kicks it up a notch!
In otherwords, when you use one, you'll have one incredible lean, mean,
oil sucking machine on your hands that'll transfer oil like a pro (plus giving others a serious case of pump envy)!
By-Pass Valve Option Available
The pump head also has the option of shipping with a built in by-pass valve that allows you to shut off the flow of oil on the discharge side without
stopping the engine. The oil simply "by-passes" the pump head until the nozzle or valve is re-opened making it a great
pump to use with discharge nozzles! This also means you can quickly stop the flow once your container is full without
having to turn off the motor.
When pumping really thick oil such as motor oil, gear oil, automatic transmission fluid, or really cold vegetable oil, using a by-pass
valve can slow down the flow of the oil because the by-pass valve senses back-pressure from the thicker oil and may open. If you're planning
on pumping these much thicker oils and need the full pump head output, we recommend getting a pump head without the by-pass option
Packed Well & Ready To Pump!
In order to make sure your pump arrives in good working order, the gas engine is mounted to a sturdy
wood base and then placed in a heavy duty shipping box. Padding is added, then it's sealed up, labeled
and heads your way!
Add A Digital Flow Meter!
If you'd like to get an idea of how much oil has been pumped each time, swing for our cool flow meter that attaches to either
side of the pump. Just choose the flow meter option below & we'll include one with your pump.
- Harbor Freight "Predator" 79 cc Gas Engine Owners Manual
Pump Head - 1 Year through manufacturer
79 CC Motor - 1 Year directly through Harbor Freight.
The gas motors are purchased direct from Harbor Freight with the extra 1 year warranty on them.
A copy of the receipt with the warranty information is included with the pump.
Harbor Freight will honor the warranty at any of their stores as long as you present the
receipt should the need arise.
This pump has a cast iron pump head, steel gears and is lubricated by the oil passing through the pump.
The pump is not warranted or recommended for pumping water, oil with high water content,
highly aqueous solutions (ie. waste trap grease),
highly flammable liquids (ie. gasoline, methanol), or solids.
Buy One Today & Start Pumping Like A Pro!!
Gas Powered Pump Features
- 79 CC 2.5 HP 4-stroke Gas Motor w/ 16 mm shaft
- Max 3600 RPM
- Fuel capacity: 2 liters (0.53 gallons)
- Engine oil included with shipment
- 25 GPM Gear Driven Pump Head
- By-pass valve built into pump body
- 3/4" NPT ports on pump
- Ships with 1" Hose Barbs
- Includes handy carrying handle & pump head support
- Ships pre-assembled & mounted to a wooden base
Ships from our Michigan warehouse