The Perfect Upgrade To A BioPro 190, or 380 Automated Biodiesel Processor!
Using patent-pending fluid separation technology, Springboard Biodiesel is now able to provide current and future BioPro
users the ability to reduce processing time by half and double the capacity of every
By incorporating its proprietary and patent-pending fluid separation process into its product line, Springboard Biodiesel now offers two new products that enables the rapid separation of biodiesel from other fluids and thereby simplifies and accelerates the overall biodiesel processing experience.
What They Do
The INCOSEP, short for Induced Coalescense Separator, makes it possible to make Biodiesel in a BioPro Biodiesel Processor in a fraction of the time it normally takes!
The INCOSEP will allow you to make Biodiesel in record time with a BioPro. Combined with a SpringPro T76 Dry Wash Tower and a BioPro 190, you can now turn out 50 gallons of Biodiesel in as little as 11 hours!
When installed on a BioPro 190 or BioPro 380, the INCOSEP will separate glycerin in under 25 minutes shaving nearly 16 hours off of the reaction cycle. The INCOSEP also will separate wash water during each wash cycle in as little as 10 minutes saving up to 12 hours off the normal wash cycle.
Can't see the video? Click here!
The INCOSEP device significantly reduce processing time for biodiesel production in BioPro processors. Standard BioPro processors are rated to repeatably produce ASTM-fuel every 48 hours. Half of this time (24 hours) is dedicated to esterification and transesterification reactions, as well as glycerin settling. The other half of this time is dedicated to washing (1 spray wash and 2 turbulent washes) as well as evaporative drying.
The INCOSEP also reduces the washing and drying processes to 12 hours, rather than 24. Additionally, because of the INCOSEP effectiveness in preventing emulsions, all three washes are now turbulent washes, in which the fuel is stirred into a homogenous mixture with the wash water before the water is quickly settled out and removed, thus exceeding the thoroughness of the already stringent water wash.
Check Out The Time Savings!
Reaction Cycle Time
24 Hours - Without INCOSEP
8 Hours - With INCOSEP
Water Washing Cycle Time
Total Cycle Time
BioPro 190 Cycle Times:
48 Hours - BioPro 190 Standard
20 Hours - BioPro 190 w/ INCOSEP (58% Time Reduction)
11 Hours - BioPRo 190 w/ INCOSEP + SpringPro T76 Dry Wash Towers (77% Time Reduction)
How The INCOSEP Units Install:
The INCOSEP will work in any BioPro made after Jan 1, 2007. They ship with all of the fittings, brackets, and mounting hardware necesary to install them on a BioPro 190 or a BioPro 380.
When you receive your INCOSEP, a detailed set of installation instructions will ship with it. The instructions are easy to understand and can be installed in under 2 hours.
The INCOSEP separator units attach to your BioPro's on board computer, called a PLC unit. In order for the INCOSEP system to work properly, your BioPro PLC computer will need to be upgraded. Contact Us for details on how to upgrade your PLC.
Available for the BioPro 190 & BioPro 380
Can be retrofitted to 2008 & later BioPro's or added as an option to new BioPro's.
PRICING: $4225 for BioPro 190, $4995 for BioPro 380
LEAD TIME: Currently 3-4 Weeks (as of 1/1/2013)
FINANCING AVAILABLE: Click here for details
Questions? Interested? - Email us at firstname.lastname@example.org
MGBJ Enterprises, LLC - 801-820-5753 - © Copyright 2005-2015 - All Rights Reserved - NX NEW